Nikon Wireless Transmitter WT-4 Software


ads1


Nikon Wireless Transmitter WT-4 Software Driver and Firmware (Version 1.1) update for Microsoft Windows and Macintosh Operating Systems.

Nikon Wireless Transmitter WT-4 Software Downloads

Operating System (s) : Microsoft Windows Vista, Windows Xp

  • Nikon WT-4 Win Vista Firmware – Download (904KB)
  • Nikon WT-4 Win Xp Firmware – Download (903KB)

Description:This service provides software for updating UT-1 firmware to Ver. 2.3.If the firmware installed on your product is already the version noted above, this update is not necessary.Connect the UT-1 to a camera to update UT-1 firmware. See Cameras that can be used to update UT-1 firmware for information on supported cameras.When using the UT-1 running firmware Ver. 2.3, be sure that the Wireless Transmitter Utility is Ver. 1.5.4 or later.

Confirming the firmware version:

  • Set the supported camera to MTP/PTP mode if applicable, switch off camera.Nikon Wireless Transmitter WT-4
  • Connect the USB cable to the camera and the WT-4 and turn both devices on.
  • Press the camera MENU button and select Wireless transmitter> Device Info in the setup menu.
  • Select Firmware version.
  • The currrent firmware version will be displayed.
  • Turn off camera and WT-4.

Basic Download and Nikon WT-4 Installation instructions for Windows and Macintosh:

  1. Create a new folder with an appropriate name on your computer’s hard drive.
  2. Download WT4Update.zip to the folder created in step 1.
  3. Unzip WT4Update.zip to create the folder named WT4Update containing the file _WT411_.bin : the firmware.
  4. Copy the WT4Update folder to a memory card using a card reader.
  5. Insert the memory card in camera card slot (slot one if dual slot equipped).
  6. Repeat steps 1-5 under “Confirming the firmware version” above. This time there will be an Update? option.
  7. Highlight Update, and press OK

Windows: for firmware detailed installation instructions click here (English and .PDF format)
Macintosh: for firmware detailed installation instructions click here.

Modifications/Note for Nikon Wireless Transmitter WT-4 Firmware Version 1.1:

  • Support for Thumbnail Selector 1.1.0 has been added.
  • Users of the D3:When using the WT-4 with firmware ver.1.1, be sure that the D3 A and B firmware are both version 2.00, the Thumbnail Selector is version 1.1.0 or later, and the WT-4 Setup Utility is version 1.1.0 or later.Be sure to download the latest version(s) from our website and perform the necessary upgrades.
  • Users of the D300:Be sure to upgrade the D300 to the latest firmware version before using this software. Please click here for the latest D300 firmware.
  • Users of the D700:The D700 has a firmware upgrade available, please be sure to check the Firmware link below to upgrade your camera.

Operating System (s) : Mac OS X 10.1.5, Mac OS 10.2, Mac OS 10.3, Mac OS 10.4, Mac OS 10.5.3

  • Nikon WT-4 Mac Firmware – Download (904KB)

Download the software, firmware and drivers to keep your Nikon Wireless Transmitter WT-4.

Click to rate this post!
[Total: 1 Average: 5]

ads2