Categories
Accessories

Nikon Communication Unit UT-1 Software

Nikon Communication Unit UT-1 Transmitter Software Driver and UT-1 Firmware (Version 2.4) update for Microsoft Windows and Macintosh Operating Systems.

Nikon UT-1 Software Downloads

Operating System (s) : Microsoft Windows 8, Windows 7, Windows Vista

  • Nikon UT-1 Win 8 Firmware – Download (14.37MB)
  • Nikon UT-1 Win 7 Firmware – Download (14.34MB)
  • Nikon UT-1 Vista Firmware – Download (14.35MB)

Description:This service provides software for updating UT-1 firmware to Ver. 2.3.If the firmware installed on your product is already the version noted above, this update is not necessary.Connect the UT-1 to a camera to update UT-1 firmware. See Cameras that can be used to update UT-1 firmware for information on supported cameras.When using the UT-1 running firmware Ver. 2.3, be sure that the Wireless Transmitter Utility is Ver. 1.5.4 or later.

Confirming the firmware version:

  • Connect the UT-1 to the camera via USB cable, and turn on the camera and the UT-1.
  • Press the camera’s MENU button and select Network > Options > Firmware version from the setup menu (D800/D800E: setup menu > Network (UT-1) > Options > Firmware version).
  • The UT-1’s firmware version will be displayed.
  • Turn off the camera and UT-1.

Basic Download and Nikon UT-1 Installation instructions for Windows and Macintosh:

  1. Windows:Create a new folder with an appropriate name on your computer’s hard disk.
  2. Download F-UT1-V23_W.exe to the folder created in step 1.
  3. Run F-UT1-V23_W.exe to create the folder titled UT1Update, containing the following file: • _UT1_23_.bin: the firmware
  4. Format a memory card with the camera and use a card reader or similar device to copy _UT1_23_.bin to the memory card.
    • Macintosh:Download F-UT1-V23_M.dmg.
    • Double-click the F-UT1-V23_M.dmg icon to mount the disk image titled, F-UT1-V23_M. A folder titled UT1Update, containing the following file, will be created inside the disk image:
      • _UT1_23_.bin: the firmware
    • Format a memory card with the camera and use a card reader or similar device to copy _UT1_23_.bin to the memory card.
  5. Insert the memory card containing the firmware in the camera.
    • When updating firmware with a camera that does not support switching between the primary and secondary slots, insert the memory card in the camera’s memory card slot 1.
  6. When updating firmware with a camera that supports switching between the primary and secondary slots, insert the memory card in the camera’s primary memory card slot.
  7. Connect the UT-1 to the camera via USB cable, and turn on the camera and the UT-1.
  8. Press the camera’s MENU button and select Network > Options > Firmware version from the setup menu (D800/D800E: setup menu > Network (UT-1) > Options > Firmware version).
  9. Follow the instructions displayed to update the firmware.
  10. After the update is complete, turn off the camera and UT-1, and remove the memory card.
  11. Confirm that the firmware has been properly updated.

Windows: for firmware detailed installation instructions click here 611KB (English and .PDF format)
Macintosh: for firmware detailed installation instructions click here 559KB (English and .PDF format)

Supported Cameras:

  • D4S, D4, D810, D800*, D800E*, D750, D7200, D7100, and D7000. However, UT-1 firmware can only be updated using the following cameras.
  • D810, D800*, D800E*, D750, D7200, and D7100
  • * D800 and D800E cameras running A and B firmware Ver. 1.10 or later are supported.

Modifications/Note for Nikon UT-1 Firmware Version 2.3:

  • Support for the D7200 has been added.

Operating System (s) : Mac OS X 10.6.8, Mac OS 10.7, Mac OS 10.8, Mac OS 10.9, Mac OS 10.10.2

  • Nikon UT-1 Mac Firmware – Download (14.35MB)

Download the software, firmware and drivers to keep your Nikon Communication Unit UT-1 Transmitter.




Exit mobile version