Nikon D300 Software


ads1


Nikon D300 Digital SLR Camera Software Driver and Firmware (Version A/B 1.11) update for Microsoft Windows and Macintosh Operating Systems.

Nikon D300 Software Downloads

Operating System (s) : Microsoft Windows 8, Windows 7

  • Nikon D300 Win 8 Firmware – Download (1.6MB)
  • Nikon D300 Win 7 Firmware – Download (1.5MB)

Operating System (s) : Microsoft Windows Vista, Windows Xp

  • Nikon D300 Win Vista Firmware – Download (1.6MB)
  • Nikon D300 Win Xp Firmware – Download (1.5MB)

Confirming the firmware version:

  • Turn on the Nikon D300
  • Press the MENU button and select Firmware Version from the setup menu.The camera’s firmware version will be displayed.
  • Turn off the Nikon D300

Basic Download and Nikon D300 Installation instructions for Windows and Macintosh:Nikon D300 Software for this D300 Digital SLR Camera

  1. Windows:Create a new folder on your desktop labeled D300 firmware.
  2. Download F-D300-V111.exe ot the folder created in step 1.
  3. Run F-D300-V111W.exe to create the folder titled D300Update containing the: A3000111.bin : the A firmware, B3000111.bin : the B firmware
  4. Connect the camera to the computer via USB cable (be sure that the camera’s USB item in the setup menu is set to Mass Storage), or use a memory card reader to copy the A firmware file to the root of the drive representing the memory card, and not into any folder on the card.
  5. When disconnecting a camera from the computer, use the standard OS procedure to disconnect when required.
  6. Insert the memory card containing the firmware in the camera’s memory card and turn on the camera.
  7. Select Firmware version from the setup menu and follow the instructions displayed on the camera monitor to upgrade the firmware.
  8. After the firmware is complete, confirm the cameras’s firmware version. Format the memory card in camera and repeat steps 4-8 to update the B firmware.
  9. If you changed the USB setting to Mass Storage, to perform this update, it may be changed back to MTP/PTP.
  10. Macintosh:Download F-D300-V111M.dmg.
  11. Double-click the F-D300-V111M.dmg icon to mount the disk image titled, F-D300-V111M.
  12. A folder titled D300Update, containing the following files, will be created inside the disk image: -A3000111.bin: the A firmware, -B3000111.bin: the B firmware.
  13. Connect the camera to the computer via USB cable (be sure that the camera’s USB item in the setup menu is set to Mass Storage), or use a card reader, and copy the downloaded A firmware to a memory card formatted by the camera and inserted in the camera or card reader.
  14. If the camera was connected to the computer, use standard OS procedures to disconnect the camera from the computer.
  15. Insert the memory card containing the firmware in the camera’s memory card slot and turn on the camera.
  16. Select Firmware version from the setup menu and follow the instructions displayed in the monitor to upgrade the firmware.
  17. After the upgrade is complete, turn the camera off and remove the memory card.
  18. Format the memory card with the camera and repeat steps 3 through 7 to update B firmware.
  19. Once firmware update is complete, confirm the camera’s firmware version.If you changed the USB setting to perform this update, it may now be changed back to MTP/PTP.

Modifications/Note for Nikon DSLR D300 Firmware Version A/B 1.11:

  • NOTE: This update is for the D300 model only, and not the D300S. Do not attempt to upgrade the D300S with this firmware.Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.

Software:

Operating System (s) : Mac OS 10.1.5, Mac OS 10.2, Mac OS 10.3, Mac OS 10.4, Mac OS 10.5, Mac OS 10.6, Mac OS 10.7, Mac OS 10.8.x

  • Nikon D300 Mac Firmware – Download (2.01MB)

Download the software, firmware and drivers to keep your Nikon D300 DSLR Camera.


ads2